• Utilizes both styles of clips.
• RB Stand-Off and RB Flush Mount Clips can be applied for radiant heating and potable water installation.
• Saves time.
• Uses the power of air to get the job done accurately and quickly. Cannot damage tubing.
• No chance of piercing, compressing, or overdriving the nails of the clips. Lightweight and easy to use.

This light weight concrete product is applied over the radiant (pex) tubing. With this application the pex tubing is stapled directly to the sub-flooring. The "Gypcrete" is then pumped directly over the tubing at a thickness of 1-1/4-1-1/2 inches. On wood framed floors some structural reinforcement may be necessary. Licensed contractors are available who are trained to apply this product.

The AMTROL FILL-TROL® system consists of a specially adapted EXTROL® pre-pressurized, diaphragm-type expansion tank, and the FILL-TROL, a specially designed, automatic, fill valve.

• Provides accurate system make up
• Eliminates need for a separate, automatic fill valve
• Fully adjustable up to a maximum working pressure of 100 psig
• Factory pre-charged to 12 psig; tank pressure controls system fill

How Enhanced Air Separator works: As system water enters through the inlet, the diffuser distributes flow evenly across the stainless steel, wire brush-like medium. Air bubbles, even micro air bubbles, stick to the brush filaments. Trapped air rises above the diffuser through a baffle where the air is then released through an opening at the top. Deareated water then goes back into the system.

Erie has been an industry leader in temperature control since 1943, providing modern environmental comfort in commercial, industrial, and residential buildings worldwide. Erie is a member of the Invensys Building Systems group.

Erie's motorized hydronic valves, the PopTop® provide reliable and easy installation for a variety of heating and cooling applications. Installation is a snap with easy, one-handed removal or engagement of the actuator to the valve body. Push a button and lift. It's that simple.

• High starting torque for dependable seasonal start-ups (Up to 80% more than competing circulators)
• Unique B&G DuraGlide Bearing System assures years of trouble-free start-ups
• Closed impeller design improves operating efficiency
• Backed by B&G's representatives and a 3-year warranty--the best in the business
• Self-cleaning particle shield protects the shaft and bearings from system start-up debris
• One-piece, high-nickel stainless steel stator can isolates the stator from system fluid and maintains precision bearing alignment for longer bearing life
• Carbon bearings, diamond-like ceramic shaft and generous clearances are more resistant to lime, chloride and oxide build-up
• Face plate and rotor sleeve feature corrosion resistant stainless steel construction for longer life

Check-Trol is the solution for circulator installations. Installing a Check-Trol on the discharge of the circulator gives you the features of a Flow Control Valve, Isolation Valve and Companion Flange. Another advantage of the Check-Trol is the minimal pressure drop, especially when compared to the losses that can be experienced when a check valve is installed internal to the circulator. The Check-Trol flanges are packaged with an isolation flange of the same size to create a pair. Capscrews and nuts are included

• Elegant design
• Zoning system compatible
• Adjustable differential
• Large LCD temperature display
• Battery operated
• Precise temperature sensing
• Easy access terminal block
• Selectable fahrenheit or celsius
• Compatible with standard 24-volt AC single stage heating systems
• Integral five-minute anti-short cycle protection
• Mercury-free, environmentally safe
• Manual Changeover